ANK          blog       my video game collection       photogallery       credits        
 :: blog/latest/hddvd xbox 360 player smoked [blown capacitor]
HDDVD Xbox 360 player smoked [blown capacitor]
posted by Kaneda – on Tue. 30.January 2018
 






13 comments to HDDVD Xbox 360 player smoked [blown capacitor]
 
Frogger ~ on: 24.02.2018 at 16:40
 Grundgütiger !! Die teile gibt's noch?  
 
Kaneda ~ on: 27.02.2018 at 09:16
 Jepp, ist ein schnes Stck Geschichte! 
 
Microsoft rules! ~ on: 21.08.2018 at 21:35
 This happened to my new(unused) xbox 360 hd dvd player in couple of minutes of use. I opened the case and the same capacitor was busted. Need to find a new capacitor. 
 
Kaneda ~ on: 22.08.2018 at 09:11
 Yes, it does not matter if you used or not. Cap got old and dry after some years. They used not so good one. Player should still work after replacement. Take at least 1000uF/16V 
 
KDallas ~ on: 09.02.2019 at 07:29
 This happened exactly the same way to mine a few minutes ago. At first I thought I'd gone and plugged in the wrong PSU adapter, but no - sure enough it's a PSC24W-120. I plugged in the USB cable first then power, and switched on at the socket. Within about 20 seconds there was smoke coming out. Haven't touched the drive in 6-8 years.  
 
Kaneda ~ on: 10.02.2019 at 14:20
 As I thought, the same will happen to a lot of other drives. Please tell us later if you managed to get it work again after replacing the capacitor. 
 
Rover ~ on: 18.11.2019 at 22:34
 Last used OK about 5 years ago. Last week the drive did not make a noise or smoke, it just lived for a few minutes and then drive motor stopped and could not eject HD DVD disc. So turned it off and found this site informative site. Sure enough the Sanyo 1500uF/16V was bulging and residue on side. Replaced with Panasonic EEUEB1C102 - 1000 F, 16 V, EB. It's working again!!! But should I replace with a 15000F cap? Will this cause damage over time if don't? 
 
Kaneda ~ on: 19.11.2019 at 09:36
 This one died pretty quite :D I did not measured the ripple on that cap at all, so it is difficult to say how much the difference is between 1000F and 1500F. Smaller caps (body size) dry faster then bigger one, so if you want to use your HDDVD drive in 20years again, just put the bigger one in. 1000F should do for now :) Thanks for sharing this information. It looks like this cap is the weakest spot of this drive. 
 
Maciek ~ on: 04.03.2023 at 20:29
 Thanks for this post :) I recently bought a X360 HD DVD Player from CeX. When it came i connected player to an electric outlet and about one minute after i start playing movie, a smoke came out from the inside. About day later i bought a new capacitor. Today i replaced an old capacitor and the player work just fine :D 
 
Tobias ~ on: 09.07.2023 at 00:38
 Just happened for my new out of the box never used drive too. I'm kinda new to the entire capacitor game. How long do I have to get it replaced? Is a week still fine? Or should I remove the capacitor as fast as possible and then put the new replacement in? Also has anyone a good link where to buy one, a capacitor in Europe? Would appreciate a answer 
 
Kaneda ~ on: 10.07.2023 at 09:33
 Hi Tobias, I would say replace the cap within 1 month. And clean thoroughly the PCB with alcohol. If you from Germany, you can get el caps at https://www.conrad.de/ or https://www.reichelt.de/ 
 
DarrylPyrope ~ on: 29.07.2023 at 13:55
 Many thanks for posting this, I just had this happen to me! Plugged in the player and next thing I knew smoke was billowing from the holes in the back. I have a new cap on the way and everything should be like new! Any suggestions on removing the glue? 
 
Kaneda ~ on: 31.07.2023 at 09:13
 Hi Darryl, use scalpel or sharp thin knife to precut the glue close and alongside the pcb (be careful close to other smd components) then use hot fan to make it warm, just before you solder it out. 
 
 Name
 Email [will not be published]
2000-2023 by ANK » Email: cu[at]anikaneda[dot]com